Arty Lobster 3D Printed pet figurines

I was sent figurines from Arty Lobster for review. All opinions are my own.

I was really excited to get a dog before we brought My pugs Frank & Beans home. I thought it would be fun and I expected to grow to care about them a lot. Still, it surprised me just how quickly and intensely I grew to care for them. I had a lot of pets growing up who I would have said I loved, but having two of my own as an adult was very different. These two little dogs are really more like family for me.

Real dog with dog figurine arty lobster pug

Ryan had a really special dog that he essentially grew up with. That dog passed away a couple years after we started dating. We didn’t really have any kind of keepsake to remember that dog with. So, when I heard about Arty Lobster and how they make custom 3D printed sculptures for pets I loved the concept. Of course, we are hoping our dogs have many years of great health left but it’s just really cool to have a physical representation of them that we can keep forever.

The figurines are made based on photos, so if you have a dog that has already passed away you can have a figure of them made based on those photos.

Arty lobster dogs and pet sculptures

I emailed in photos of the pugs. They recommend sending 5 to 10 and there is not any real strict requirements for the photos. For example, it’s fine if part of their body is cut off in some shots. The sculptures are not 100% based on any one photo, but instead, they use the combination of photos to create the overall look. I tried to send in photos that show their body from different angles, and their faces from different angles.

I believe my dogs are full breed pugs, and I understand hat they look fairly similar to most of our family members or friends who see them only on rare occasion. However, on a closer look they really do have several differences. For Ryan & I, it’s very easy to tell them apart. I suppose it’s sort of like having twins in that way! I was really impressed with how Arty Lobster took our photos and made the figures specific to each dog. It’s very clear that they didn’t use a generic “pug” base. I will try to point out some of those differences between my dogs in real life, and how those differences showed up in the figurines.

Arty Lobster 3D Printed pet figurines

And some photos for comparison.

Frank and beans

 

 

The most obvious difference is their faces. Frank has a much darker face. However, his face is still not pure black. He has some tan spots that sort of show through on his face, particularly around his eyes. I love how they captured that! It’s a bit hard to photograph, but Frank’s sculpture is just a hair taller than Beans’. In real life, there is about a 1.5 inch height difference but it certainly isn’t obvious when viewing photos of just one or the other of them. So, it really impressed me that they caught that difference in the sculptures. They even captured the difference in how their face wrinkles lay. When viewed from the side, Frank has a rounder belly, and thicker shoulders and hips just like he does in real life. He is just slightly bigger in general, though it’s not enough to be noticeable to most people. While both dogs have excess skin that hangs at their neck, Beans has much more and that was captured as well.

Arty Lobster figures side by side

Arty Lobster is not just limited to dog sculptures, they also offer sculptures of cats or horses. You also share your pets’ name so they can be put on the base of the sculpture. When I placed my order I requested that they were made standing up. However, they do also offer ones sitting or laying.

After you send in your photos you will be emailed a preview of your sculpture. This is a graphic image that your figurine will be based on. You can request edits as this stage. I requested an edit on Beans. When I was picking my 10 photos of her to send in, I was focused on getting photos of her from as many body angles as possible. I wasn’t considering how new or old the photos were, unfortunately. I sent in a couple that were a few years old, when her face was much darker. The preview had partially focused on those older photos so her sculpture showed her looking much darker than she does now. Here is a photo of Beans from about 4 years ago to show you her old appearance.

Beans old photo

This was right after we got the pugs. She quickly got much more gray in the face. Seems how she had this darker look for such a brief time with us, I really wanted the sculpture to represent her more current appearance. Here is the original preview I was sent.

arty lobster preview

Upon seeing that, I asked if I could send in additional photos that showed her face in more recent photos. Here is the second preview I was sent and I accepted this one so it was the one used to print the sculpture.

Beans arty lobster preview

I really like how it gives you the ability to have a say in the final piece. These sculptures will be treasured for years to come, so it’s to be expected that you want to have a bit of say in exactly how it looks. My advice for sending in photos is to do a photo shoot if you can. Going outside to get better lighting is great. Then try to get a photo of your dog from each angle and a few face shots. This way, you won’t have to worry about some of your photos being older and not showing them as they currently look. Plus, if you want the sculpture to include a collar or clothing you can do that by sending in photos that all use that clothing or accessory item and by noting that preference in your order. They were great about redoing the preview but I felt bad for needing more of the designers time.

Overall I am really happy with both of our Arty Lobster pet sculptures. I think they would be a great gift for anyone who adores their pet, or who has recently lost a beloved pet.

You can learn more or purchase from Arty Lobster by visiting ArtyLobster.com. It is too late to be gauranteed delivery before Christmas, but I think they make a great gift. I would be glad to wait on my sculpture to come in the mail after Christmas if it was me!

 

 

This post currently has 15 responses.

  • Amber Ludwig

    OH these are just ADORABLE!! They look just like them too!! My best friends are fur mamas and these would make purfect gifts for them!! Such a great idea!

  • rich morris

    That is SO COOL. I love that and what an awesome idea. How fun would that be and I wish i had that for my childhood dog

  • olga

    These are so cute. They make a nice home decor.

  • Priscilla Marie

    I didn’t know this existed until I read your blog, I’m so in love with these I want to purchase one of my dog and one of my mother in laws pet! Super adorable

    Thanks for sharing

  • Lauryn R

    Wow, they seriously did such an amazing job on your sculptures! I am so impressed, and what a wonderful way to keep their memories alive even after they are gone. 🙂 Thank you so much for sharing this, I also know quite a few people that would love to have some made as well.

  • Sab Edwards

    WOW that is really neat!! My hubby got bored and wanted to see if he could, and he did, built his own 3d printer… there is TONS of things to make but the filiment is the most expensive part

  • DJ

    I love how life-like these sculptures look! They are really nice! This would be a great way to remember my pup, who’s now a senior. He’s 14 years old now.

  • ellen beck

    I can see he difference in yourdogs right away, maybe its the animal lover in me.I love their names ! One has a lighter face than the other and I think the figurines capture that quite well. I like how if you dodn have a whole lot of pictures of the entire animal they could do a composite. I think they did a fine job on Frank and Beans!

  • Melissa Storms

    This is a great keepsake. Our animals are a part of our family and I would love tovhave one of these sculptures of each of them.

  • gloria patterson

    This would be great for some people but for me no. I have lost 2 cats and I would not want a keepsake like this. To me it is kinda mounting a deer head, just my thing at all. Memories work for me.

  • Peggy Nunn

    This is such a thoughtful gift for a pet owner. they are truly a part of the family. Thank you for letting me know about Arty Lobster Custom 3D sculptures.

  • Amy D

    This would make the perfect gift for so many of my friends and family! It’s amazing to see what technology can bring us!

  • MeMe R

    I’m going to have to show this to my husband when he wakes up (works 3rd shift) because we have 4 rescues and have talked about getting pillows to mess with them but these would be even better. All of our pets are super spoiled and super jealous if we show the others any bit of any more attention. These would be perfect to get back at them for the foot in the face in the middle of the night or better the cat falling on my face and getting startled while I was sleeping lol.

  • Julie Waldron

    These are kind of cool and so real looking! I would be a great way to memorialize a beloved pet.

  • katie

    Love the figurines! I bet my daughter would love one of our senior pup, it’s her baby.

Leave a Reply fot Priscilla Marie Cancel Reply

*
* Your email address will not be published.